Product
description
HM-98 is a top quality water white hot-melt
adhesive based on heat-stable resins and EVA
co-polymer. It possesses low odor and low smoking
properties.
Typical
use
Perfect binding of books, periodicals, telephone
directories on high speed machines like
Muller-Martini, Salby etc.
Technical
data
Base
polymer |
EVA |
Color |
Water
white |
Density |
0.95 |
Viscosity
(Brookfield) at 170°C |
2200
mPas |
Softening
point (Ring and Ball) |
70°C
±
5°C |
Form |
Pellets |
Other
properties
Application
temperature |
160
- 180°C |
Open
time * |
6-10
sec |
Setting
time * |
6-10
sec |
Application
system |
Wheel
applicators |
(Open and setting time are also depending on the
thickness and temperature of the applied
hot melt. These values are the average.) |
Storage
If
the adhesive is stored in its original sacks in
a cool and dry place, a minimum stability of 12
months may be expected.
In
order to avoid caking, direct contact with
sunlight must be avoided.
Do
not stack pallets of adhesive.
Safety
Even
if correct application temperatures are
observed, hot-melts give out fumes. Proper
ventilation of working place is advised.