Product description

HM-32 is a hot-melt adhesive based on heat-stable resins and EVA copolymer. It has a short open and setting time values, good flexibility and excellent adhesion on paper  .

Typical use

Sealing of cartons and cases of various sizes on high -speed packaging lines.  Also, erecting of trays for cans, milks, fruit packaging etc.

Technical data

Base polymer	EVA
Color	Light yellow
Density	0.95
Viscosity (Brookfield) at 150°C	1300 mPas
Softening point (Ring and Ball)	105°C  ± 5°C
Form	Pellets

Other properties

Application temperature	155 - 180°C
Open time *	2-4 sec
Setting time *	1-2 sec
Application system	Wheel or nozzle applicators
(Open and setting time are also depending on the thickness and temperature of the applied hot melt, room temperature and kind of adherent’s surface.)

FDA Status

HM 32 complies with FDA indirect food contact regulation 175.105 regarding adhesives. 

Storage

If the adhesive is stored in its original sacks in a cool and dry place, a minimum stability of 12 months may be expected.

In order to avoid caking, direct contact with sunlight must be avoided.

Do not stack pallets of adhesive.

Safety

Even if correct application temperatures are observed, hot-melts give out fumes. Proper ventilation of working place is advised.