Suggested Uses Duramelt D-2415 is a hot melt adhesive used for the «recap» system of Tetrapack machinery, for bonding PE , PP and HDPP caps to Carton Base Synthetic resins Technical data Viscosity (Brookfield, Thermosel System) at 180°C (MC07/ASTM D.3236) 13 500 cps Softening point (R&B) Typical 150 șC Color Ivory Density Approx. 0.95 Other properties Open time Short/Medium Good adhesion to PE, PP, HDPP and Carton. Good impact resistance at low temperatures. FDA STATUS: All components comply with paragraph 21 CFR 175.105 of FDA Legislation. Application For use in nozzle, wheeler, roller or other applicator system. During extended machine stops it is recommended to switch off the heating. Cleaning While hot by scrapping with a spatula. Remove any rests with Nordson cleaner or other. Form of supply Blocks Storage Cool and dry. Storage life: at least 1 year according to our experience.
Suggested Uses
Duramelt D-2415 is a hot melt adhesive used for the «recap» system of Tetrapack machinery, for bonding PE , PP and HDPP caps to Carton
Base
Synthetic resins
Technical data
Viscosity (Brookfield, Thermosel System) at 180°C
(MC07/ASTM D.3236)
13 500 cps
Softening point (R&B)
Typical
150 șC
Color
Ivory
Density
Approx. 0.95
Other properties
Open time
Short/Medium
Good adhesion to PE, PP, HDPP and Carton.
Good impact resistance at low temperatures.
FDA STATUS: All components comply with paragraph 21 CFR 175.105 of FDA Legislation.
Application
For use in nozzle, wheeler, roller or other applicator system. During extended machine stops it is recommended to switch off the heating.
Cleaning
While hot by scrapping with a spatula. Remove any rests with Nordson cleaner or other.
Form of supply
Blocks
Storage
Cool and dry. Storage life: at least 1 year according to our experience.
Copyright © 2003 EPCO Industrial Adhesives. All rights reserved.
Email : info@hot-melts.com Tel : +30 2310 462 155 Fax : +30 2310 462 395